1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

What have u done to ur GM truck today?

Discussion in 'Chevy Truck Talk & GM News' started by devilsalmostfree, Feb 28, 2010.

Thread Status:
Not open for further replies.
  1. SurrealOne

    SurrealOne Former Member 1000 Posts

    There's more to do?!
  2. Sierraowner5.3

    Sierraowner5.3 Active Member 1000 Posts

    always room for more mods!

  3. SurrealOne

    SurrealOne Former Member 1000 Posts

    Actually room is what's getting to be VERY tight. Also the complexity level keeps going up...
  4. AMac

    AMac New Member

    Well it's a little late but I celebrated my 1 year anniversary of ownership on 1/27/2013 :party:

    - - - Updated - - -

  5. jsmith4816

    jsmith4816 New Member

    I didn't, but my neighbor decided to do some body work. She slid down a hill and hit my rear bumper. Wasn't too mad since it messed up her car way more than mine. Another reason why i love older trucks....Steel!
  6. Conlan Rose

    Conlan Rose Super Moderator 1000 Posts

    Today I watched several videos on how to solder and created a 12v DC tester using a hobby shop train transformer. Now I can test LEDs, bulbs, and circuits before install.
    P2020067.jpg P2020047.jpg P2020048.jpg P2020049.jpg P2020050.jpg P2020051.jpg P2020052.jpg P2020053.jpg P2020054.jpg P2020055.jpg P2020056.jpg P2020057.jpg P2020058.jpg P2020059.jpg P2020060.jpg P2020061.jpg P2020062.jpg P2020063.jpg P2020064.jpg P2020065.jpg P2020066.jpg
  7. Enkeiavalanche

    Enkeiavalanche Moderator 1000 Posts

    Not much.. Did a quick move to Brooklyn to deliver a 65in LED Tv.. And a little Mod....[​IMG]

  8. SurrealOne

    SurrealOne Former Member 1000 Posts

    • Removed the front grille
    • Removed the front bumper
    • Rremoved billete bumper slot grille
    • Fabricated mounts for a pair of Rigid 10" SR-Series Specter light bars
    • Installed twin Rigid 10" SR-Series Specter light bars into the bumper slots
    • Modified bumper mounts to allow enough clearance to aim/adjust the light bars
    • Placed light bar wiring in wire loom and routed/secured it within the bumper
    • Terminated light bar wiring in an environmentally sealed male connector
    • Fashioned a ground wire, placed in wire loom, and connected to same ground location on the frame as my auxiliary battery
    • Fashioned a positive wire, placed in wire loom, soldered a connection to the appropriate position on my Bussmann relay box (to trigger via the FRONT LIGHTS rocker switch in the cab), and heat shrunk it
    • Routed both the positive and ground connections to a location near where the FRONT LIGHTS connection point will be when the bumper is reinstalled

    Tomorrow I should only have to reinstall the bumper, clip the positive and negatives wires to length, fashion an environmentally sealed female connector, connect it, put a fuse in the relay box, test my handiwork, aim the lights, and reinstall the grille. That's the theory, anyway...
  9. Enkeiavalanche

    Enkeiavalanche Moderator 1000 Posts

    Also did this... DSCF1088.jpg DSCF1113.jpg Look for the post
  10. reggiecab2000

    reggiecab2000 Member

    finally sold my 20" wheels!
    which ive had sitting for 2 years
Thread Status:
Not open for further replies.

Share This Page