Will this tire and wheel combo fit my 2011 truck

Discussion in 'Wheels & Tires' started by Mikeyk09, Jul 22, 2013.

  1. Mikeyk09

    Mikeyk09 New Member

    Hey I have a 2011 Silverado extended cab and was looking into getting some new wheels and tires. I like the look for the KMC rockstar 2s, prolly looking to get the 18"s. I was also looking into the Nitto Terra Grapplers. Anyone know if this setup would work without a lift or level kit? if so anyone have any recommendations? or possibly a different set up that looks similar/sweeter LMK!
  2. ajarman

    ajarman Epic Member 5+ Years ROTM Winner 1000 Posts

    What offset wheels? What width wheels? What size tires? All this plays a big part in "will it fit"
  3. 95C1500

    95C1500 Rockstar 100 Posts

    www.tirerack.com Try this place. Find the size wheel you want after selecting your vehicle and it will give you the recommended tire size for no lift.
  4. mfleetwood

    mfleetwood Epic Member 5+ Years ROTM Winner 5000 Posts

    ***Edited thread title slightly to more match topic***

    x2; definitely need more information.
  5. Mikeyk09

    Mikeyk09 New Member

    Okay so I've done a little more research and this is kinda the overall setup I was looking into. First, 2" rancho leveling kit. Second, Nitto Terra Grapplers 285/70/17. Third, rims? I like the rockerstar 2s, I like the black finish and all, but can be influenced to change the rim. im looking for 17x8 or 17x8.5 pending on if both will fit the truck after the level.
    Last edited: Jul 26, 2013
  6. RadoRage

    RadoRage Rockstar

    I have a 2011 ext cab and bought the 20x9 XD Hoss wheel in the +18 offset. You really need to look at the offset to be sure it wont rub. Your stock wheels are tucked and getting wheels that stick out will cause rubbing. If your looking at getting a leveling kit, I'd do that first. It will open up the range of wheels that will fit without rubbing and allow for a bigger tire.
  7. Mikeyk09

    Mikeyk09 New Member

    Yea, that is the plan, I no the 285/70/17 wont fit without the level in the front, and even with its still close, and thats why im wondering if anyone has a similar set up. I don't wan to have to cut any of the fenders

Share This Page

Newest Gallery Photos