Newest Gallery Photos

  1. Welcome To GMTruckClub.com!

    The #1 Chevy Truck Forum Online
    Online since 2004, we are the #1 Chevy Truck & SUV forum and user community. If you have any questions about your Chevy or GMC Truck, SUV or Crossover, or just want to connect with other GM owners and enthusiasts around the world, you've found the best place on the internet to do that.

    Join Today ~ It's Free
    Registering is Free and Easy! Hope to see you on the forums soon!

Wiring extra lights to come on with highs

Discussion in 'Chevy Truck Accessories' started by b_cherewyk, Apr 29, 2010.

  1. b_cherewyk

    b_cherewyk New Member

    Planning on adding a couple of drivng lights behind the grill on my 06 Silverado, can anyone point me in the right direction on how to properly wire them up to come on with my high beams? thanks
  2. tbplus10

    tbplus10 Epic Member Staff Member 5+ Years 5000 Posts Platinum Contributor

    Use a selenoid with the switching wire "T''d into your high beams, this will draw power from the battery but turn the lights on when you turn on the high beams.
  3. b_cherewyk

    b_cherewyk New Member

    Ok, the lights that i bought came with a relay, is it possible to just run the trigger wire to the same spot that some people stick a diode in to make the fog lights stay on with the highs? (i believe it's #85 under the high beam relay) and if this works do i need to put a diode in or just the wire?
  4. tbplus10

    tbplus10 Epic Member Staff Member 5+ Years 5000 Posts Platinum Contributor

    Yep this should work for you. Just run the wire.

Share This Page