GM Truck Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Chevy Suburban Forum (GMC Yukon XL)
    Is there anyone who's able to help us install an upper control arm ? ( fit 2007-2014 chevy suburban 1500 ) As we just put the design into production and not sure if it will finally fit the truck very well. Hope to get some suggestions or ideas during this process..
  2. Chevy Suburban Forum (GMC Yukon XL)
    I just bought a used 2003 Chevy suburban and it was working good, I like to replace certain parts to make sure it lasts a long time and I don't have to worry. I've already planned on replacing the spark plugs, alternator, belts and oil. But before I could get to any of that, today while driving...
  3. Chevy Suburban Forum (GMC Yukon XL)
    97' Suburban 1500 Shakes after I accelerate to 40-60 mph only when given gas, and only when it's already warm. Doesn't do it on cold start at all, just swapped distributor, so it's not as bad, but still going on. It's fine if shifts to another gear and only below 2,000 RPM. I was told it may be...
  4. Chevy Suburban Forum (GMC Yukon XL)
    1998 suburban with a 5.7 having trouble shifting up, it just revs up but never shifts, backfires occurring often when revving up too. If anyone knows what could be the most likely cause I'd really appreciate the help.
  5. Chevy Suburban Forum (GMC Yukon XL)
    Hi, I have a 2008 Chevy Suburban 1500, 5.3L LT (no air ride). I decided to put a lift on my truck, and here is my setup. Front: RC 3.5" Lift 3.5" shock spacers Transaxle bracket mounts(came with kit) KYB stock coilovers MOOG Upper CA's w/offset ball joint Skyjacker 4" Lift knuckles MOOG tie...
1-5 of 5 Results
Top