GM Truck Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Isuzu Commercial Truck Forum
    I have a 2012 izuz npr HD diesel automatic. I believe is has the 5.2 I4. Upon purchasing the gaskets on either side of exhaust brake had bad leak. Was causing the exhaust light to come on as well as DPF codes. Upon fixing gaskets the dpf codes seem to be gone, truck ram regen normal. There is a...
  2. Chevy C/K Truck Forum
    Bought the engine "rebuilt" oil pressure reads below 5 psi at idle when warm cold is making 45 engine makes no knocking oil pressure increases with rpm. recently cleaned oil pan and pickup screen running 10w30 with an stp filter. Would an oil pump help or do I need to focus on rebuilding it...
  3. Member Garages
    ive been trying to perform a parasitic draw test and news to me my new klein meter wont read dc amps, so i was using voltage and reading same has battery volts, on everything from motor to chasis to ground points. what do i need to do i understand that when you read it that way its looking for...
  4. Chevy Impala Forum
    Does any one know what could be the problem/Where to start looking this is what is going on. My heat is working intermittently this is what it is currently doing. My heat/blower works fine in warm weather, Once weather gets too cold my heat will quit blowing completely, sometimes if I hit my...
  5. Lifted & Offroad Suspension
    Howdy all, New to the forum and was not able to find an answer to my Q so hopefully one of you can help! I recently installed Bilstein 5100 ride height adjustable struts on my truck to level it but it does not seem to have been leveled or changed for that matter and since I am the only one...
  6. Chevy C/K Truck Forum
    Just joined and am (not at the moment) a proud owner of the afore mentioned truck. I had a radiator leak which let you over heatin then to a blown head gasket. I’ve changed and now it won’t start. First thing first when putting back all of the sensors I am stuck with one male end not occupied...
  7. Chevy Silverado Forum (GMC Sierra)
    Hi all! Hopefully there is someone out there that can help me! I have a 2006 Silverado w/t 4.3L v6. I've been trying to diagnose a random / multiple misfire code for a few weeks now and have exhausted all my options (at least all that I know). The truck will start, run, drive, then randomly lose...
  8. Chevy Silverado Forum (GMC Sierra)
    Hey forum, I am looking for some advice on where to start diagnosing an issue I've noticed with my 2016 GMC Sierra 1500 (5.3l V8). I recently started experiencing a noticeable hesitation or almost stall-like feeling when taking corners at any speed. This truck has always felt fairly smooth...
  9. General Chevy & GM Tech Questions
    I put a brand new fully charged battery in my 2002 Yukon. Now I have absolutely nothing no lights no dinging sounds no crank nothing whatsoever so I took battery out took it back got another one tested the voltage was well over 14 hooked it up still absolutely nothing no dash lights no sounds no...
  10. GM Electrical Tech
    I have a 2002 Yukon that I purchased 3 weeks ago. I live in Minnesota I figured my battery was dying because it was taking a while to turn the motor over before starting so I replaced the battery. After battery replacement my car will do nothing everything lights up I can unlock it I can put the...
  11. Chevy C/K Truck Forum
    Hi guys so I have a major issue it's the second time I've come across that the first time I couldn't find any answers and I still have yet to this day figured it out my 99 Suburban I was just driving down the road and it just died I know why it died I ran out of gas but I put a 2 liter bottle...
  12. Chevy C/K Truck Forum
    1988 gmc k1500 taped into the cig lighter power wire then my horn running lights cig lighter etc stopped working need help need on road asap
  13. General Chevy & GM Tech Questions
    I’m Ross and I’m a parts changer. (Hi Ross!!!) I’m ashamed for not figuring this out but I’m stuck really needing some help. This started about 6 months after a black bear tune and AFM delete. I love the tune and realize this not the problem, but nonetheless spent several weeks trying to teach...
  14. Chevy C/K Truck Forum
    hey i have a 1998 k1500 with a 5.7. my blower motor wont work on high. works on the other speeds and blows strong. ive replaced the resistor, the high speed relay, the blower motor it self and the speed switch on the control panel. dont know what else to do. Please help.
  15. Chevy Suburban Forum (GMC Yukon XL)
    I have an 03 suburban with lots of miles and owned for about 7 years. I was recently trying to find out what was making a thudding suspension noise in the rear so watched video and read some forum before I decided to take a look. Got under the truck and noticed what appears to be a bent frame...
  16. Chevy Suburban Forum (GMC Yukon XL)
    My heated steering wheel is not always working in my 2013 LTZ burb. Every now and then when I press the button, the LED Illuminator will flash quickly but not stay on. Most of the time the light won’t even come on. And every once in a great while it works, but that’s a rarity. I read up on it...
  17. Chevy Silverado Forum (GMC Sierra)
    Hello, I have a 2009 Silverado LT with the 4.8 that is having electrical issues. It started a few days ago when I was driving and randomly my radio went out and my dash lights all turned on, yet my gauges read zero as I was still driving. I pulled over turned it off and on again and it started...
  18. Chevy C/K Truck Forum
    Truck has not moved (3 yrs). Ran when parked in my parents newly built garage. Can I have some help on steps to get it going again? 1. Check oil (good, 500 miles since last change, volume good, still see through, not dark) 2. pull plugs, oil the cylinders. 3. syphon old gas 4. add new gas...
  19. General Chevy & GM Tech Questions
    2000 K-3500 7.4l, for over a year I have had a issue with very low power after startup, 1-5 minutes. Truck acts just like cats are plugged until it just instantly snaps out of it and starts running fine. This occurs on cold start and on hot start though it takes less time to clear on hot start...
  20. Chevy C/K Truck Forum
    Can I use a nv4500 bell house on a sm465 5 speed is fuped. If so cant I just use my existing master line and slave system 1989 k1500 155.5 wheelbase np241c getrag290 5 speed
1-20 of 21 Results
Top