GM Truck Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Chevy Silverado Forum (GMC Sierra)
    2011 Chevy Silverado LS, 4.8L V8, 4L60 trans. Looking to swap to a 6.0 as towing a 16ft enclosed trailer is pretty difficult. I've seen some other forums where guys have said "yup, bolt right in no problems", but was hoping someone could chime in with a bit more confidence and details about...
  2. Chevy Silverado Forum (GMC Sierra)
    HI everyone, I've been working on a frame off restomod of an 83 jeep. I purchased a 2020 L8T for the project; No DOD/AFM, forged internals, Power steering ... a lot of great reasons to go with the drivetrain. I'm going to be running a 2018 ECU with Speartech custom L8T harness. Like most...
  3. Medium-duty Truck Forum
    I have a built 6 liter powerstroke turbo diesel with matching tranny that is just begging to be swapped into my 93 topkick. Is this possible and if so how hard will it be.
  4. Chevy C/K Truck Forum
    I threw a rod and blew the 3-4 clutch pack in my 95 I acquired the engine and transmission both working from a 98 they're both 5.7 l I've got the 98 engine and transmission installed. I swapped out that whole top end (heads and intake) of the engine so that I could have the same top end from the...
  5. GM Powertrain
    Ok I have a 2005 4l60e in my old truck. It has a tic stall converter 3200. Now the hard part. I have a built 4l60e from a 1997 truck. Can I use the 1997 trans with my tic converter, will the wiring be the same to control the trans. I know it will bolt up but what about the flex plate. Do I need...
  6. Chevy S10 Forum (GMC Sonoma)
    Hello all, My name is James and I just bought a 2000 s10 with a 4.3 5 speedand plan to put a 5.7 in it... Planned purchases. 1 transdapt kit 2 vortec 5.7 3 New radiator 4 e fans One question I have is will I need to modify the harness for the 2 injectors. Also I was wondering if...
  7. Chevy C/K Truck Forum
    Okay so I have a 1994 Chevy k1500 with the 4.3 tbi and I have a second motor that is a 94 5.7 tbi what all do I need to get to do the swap. obviously motor mounts but what else?
  8. Chevy C/K Truck Forum
    So I have a very worn out 305 in my 1995 Chevy k1500. I have a rebuilt 350 although it is carburated. It's hooked up to an also rebuilt tbh350. I know what it would take to just swap the motor (fpr, TCM, TPS), but would it be worth it to just switch out the tranny also? I drive it to work and...
1-8 of 8 Results