GM Truck Club Forum banner

1993 2500 Chevy Aftermarket Radio Harness issue

1555 Views 16 Replies 6 Participants Last post by  Harley94
Hello, I have got 1992 Chevy Silverado 2500. I am currently having wiring issues on the radio. To answer so quick questions the factory harness was not been cut off it has been plugged in to an adapter to splice to the radio. The fuse on the back of the radio is good, using a test light I have checked my fuse block under the radio fuse and I am getting power but when I trace it back to the factory harness I have no power this is on the 12 V ignition wire(Red). I do have power on the yellow 12 V constant memory wire. So just taking a shot in the dark I don't think it's the ground on the factory harness otherwise I would not have any power on my 12 V constant (Yellow). Does anyone have any suggestions or has had the same problems as me?
1 - 5 of 17 Posts
did your radio come with a schematic? If so I would start by comparing the pins to the factory harness pins to see if anything is wrong on the adapter harness.
@Zach Smith do you have a radio schematic?
Hopefully he will reply shortly, have you tried splicing in a 12v connection to test everything else?
Your the man zach. So it looks like yellow is actually ignition power. Does yellow from factory harness go to red on adapter harness?
If it's a simple matter of switching a couple pins around, I'd go that route. If you have no power on yellow wire coming from fuse then yes I'd also agree with moto
  • Like
Reactions: 1
1 - 5 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.