GM Truck Club Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Long story short I have a 93 suburban and it wont start. It dosent have spark and the injectors arnt dripping. It has fuel pressure at the throttle bodys but it wont run. I replaced the coil, cap, rotor, wires, and plugs.......still nothing the rotor turns and there is power to one of the wires that plugs into the coil but no spark I think the ecu wont let the injectors drip if there is no spark but im not sure plese help
 

·
Registered
Joined
·
279 Posts
You have to check your ignition module
 
1 - 2 of 2 Posts
Top