GM Truck Club Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Bought a burb, we have had it about 4 months, its having problems. It acts like it gets no gas sometimes and has a hard time getting going and runs rough. Replaced fuel filter and ignition module. Still acting up. Any ideas???

Thanks,
Jeff
 

·
Registered
Joined
·
3,362 Posts
Welcome to the club, it's great to have you aboard. I would replace the plugs and wires and see how that does. Good luck man. :glasses:
 

·
Registered
Joined
·
152 Posts
Is the check engine light coming on? If so, go to the local auto parts store and get the codes pulled.
How many miles on it?
You can check plug wires by misting water at night in the engine compartment with it running and watch for any visible sparks (mis-fires). I'd do that before replacing. If replacing the plus make sure to use AC Delco.
Bad O2 sensors (upstream) can wreak havoc.
Keep us updated and welcome!
 

·
Registered
Joined
·
388 Posts
do a vacuum leak check
seafoam the intake
clean the TBI
upgrade the plugs, cap, rotor, and coil.

that will get you started
 

·
Registered
Joined
·
7,172 Posts
Welcome to the Club!!!

I moved your thread here and changed your title slightly to match your topic. This will help in getting you more responses opinions.
 
1 - 6 of 6 Posts
Top