GM Truck Club Forum banner
1 - 1 of 1 Posts

· Registered
532 Posts
The clearance between the park brake shoe and the rotor is 0.6604 mm (0.026 inch).

Park Brake Pedal Adjustment

Important: Before you adjust the park brake, verify that the park brake shoes are adjusted to provide a clearance of 0.6604 mm (0.026 inch) .

  1. Verify that the equalizer nut is tightened to 3.5 Nm (31 inch lbs.) .
  2. Fully apply and release the park brake pedal 3 times.

I have little resistance also while pressing down until i'm about 3"s from the floor then i can "feel" the brake engaging then pressing on to lock the brake.

this is the "normal" operation for the PB
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.