2006 8.1L AEM Intake R&D

1 - 1 of 1 Posts

KenAEM

Registered

Joined Nov 1, 2006

4 Posts

Discussion Starter • #1 • Sep 1, 2006

Hello everyone,
AEM is looking for a 2006 Silverado 8.1L in the Los Angeles area for R&D. Please contact me at [email protected] and for further information please visit our website at www.aempower.com. Thank you
Ken Ying

1 - 1 of 1 Posts

Recommended Reading

2011 Silverado electric seat gear box

Chevy Silverado Forum (GMC Sierra)

All 3 motors run and reverse. The flexible shafts turn but the front and rear tilt gear boxes do not move the actuator screw. The seat is seldom moved so should be like new. Any ideas? Also I keep the back tilt all the way down and the front all the way up to the maximum.
- 0
- 29
- CLLewis · updated 5 h ago
ISO 2000 Silverado Center Console Options

Chevy Silverado Forum (GMC Sierra)

Hello, all. I'm looking to update the center console of my 2000 Silverado Ext Cab. I currently have the standard flip up center seat with the standard shattered lid. I'm looking for extra storage, cup holders for the rear seat, a possible locking compartment, space for toggle switches and a CB...
- 0
- 30
- OpalLacod · updated 15 h ago
Engine swap problem

Chevy Silverado Forum (GMC Sierra)

I have a 2000 Silverado 4.3 Vin W that I had swapped out with an 03 X Vin 4.3 a few years ago. All was well until the O2 sensors went out. After replacement it also threw an EGR code which will not clear. I've learned that the new engine wasn't equipped with an EGR. So I've got a used ECM to...
- 0
- 41
- Filthy Rich · updated 1 d ago
2018 Sierra Rear Axle vent hose

Chevy Silverado Forum (GMC Sierra)

Does anyone know if the 2018 Sierra 1500 rear axle has a check valve in the vent tube to keep water from coming in? Where I live, we’ve had a lot of rain and the lake is up so I have to back in further to launch.
- 0
- 30
- Reavenson · updated 1 d ago
2016 5.3 Silverado accelerating lag or jerking

Chevy Silverado Forum (GMC Sierra)

Hello I am experiencing some issues with my 2016 Silverado 5.3. having issues when. Climbing a hill and accelerating at lower RPM the truck starts to lag and jerk. Like misfiring or something. Also there's a noise that slightly screeches when RPM gets high and gears change. Truck runs fine at...
- 3
- 51
- E
  Erickson420 · updated 1 d ago