GM Truck Club Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys, I purchased a 2018 Tahoe without fog lamps.
I have a set of Chevy fog lamps for the proper year I would like to install.
I already took off the black plastic covers installed on the bumper and didn’t see any plugs for the fog lamps. Wondering if the harness is pre wired for them? There is a 15 amp fuse located in the fog lamp section of the fuse box. My question is where can I find the plugs if they are already wired into the harness and would I have to change the headlamp dial on the dash?
Also would it be advisable to wire the fog lamps to the headlamp?
 

· Registered
Joined
·
95 Posts
When i changed mine I just got on my back under the front bumper and found the plugs. Just unscrew the housings from the frames and unplug the light. Reverse the action. Rinse wash and repeat on the other side.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top