GM Truck Club Forum banner

86 suburban engine in a 95 blazer?

1551 Views 4 Replies 2 Participants Last post by  BurbanMan
Hey folks, my Dad has a 94 Blazer with a TBI 350 that needs a to be replaced. I found a good looking complete carbureted 350 out of an 86 Suburban. Is there any reason this engine cant be used in a 94 Blazer i'm not thinking of? I know i'll have to take the mechanical fuel pump off but since we have a running truck now is it not possible to take the accessories off the TBI 350 and install them on the 85 engine?
Thanks for the help
1 - 2 of 5 Posts
Check and make sure the 86 heads have the threads in them for the serpentine belt system. If not, your stuck using the v belt unless you have conversion kit. This is the problem I'm running into with the 72 350 that I'm going to run. The double hump heads don't have them. Otherwise it's plug and play
Thank you! That is exactly why I'm asking lol, I did notice the heads were different, so Ill have to look more closely at the 2.

If worse comes to worse could I just swap the heads out?
That's what I'm doing. :) put his heads on that block and problem solved!
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.