GM Truck Club Forum banner

94 Chevy K1500 not coming out of first

602 Views 12 Replies 4 Participants Last post by  Mike Petraska
Hey guys, new here.

My truck runs pretty good nost of the time. Lately having an issue with it not wanting to shift from 1st to 2nd. Especially going up a hill. Its the 4.3l 4l60e. My brother and I changed the solenoids and computer thing and put a valve thing in it. Not alot of change. I saw where others look at the mass air flow and throttle position sensors, and was wondering if that my apply in my case? Any info would be greatly appreciated.

Thanks,
1 - 4 of 13 Posts
we got this same conversation going on in a different thread. let me see if i can copy the link
  • Like
Reactions: 1
@thegawd sorry its repetitive but you seem better at this than me
  • Like
Reactions: 1
Thanks brother I'll check it out. I saw some other threads, but never really saw anything that said it worked.
yea i havent seen anything that said that fixed the problem but its a good start point.
1 - 4 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top