I'd like this to be a series of exploded views of automatic transmissions. Please submit any pics/diagrams you have of GM automatic trans. (May create a manual trans version if there is enough interest)
Here's a picture of the Quick Disconnect Cooler Line. It's the same at the radiator as it is on the transmission. Also the top line on the radiator is the return back to the transmission on most trucks.
OBD I is all GM up to 1995. To retrieve codes on OBD I vehicles simply jump the terminals A & B with a paper clip or cotter pin. The Check Engine Light will blink out your codes. OBD I codes are 2 digit codes. The light will blink "12" which is a 1 blink followed by 2 blinks before and after the codes are flashed out. If there are no codes you will just get the "12" which means no codes present.
Here's a picture of the Quick Disconnect Cooler Line. It's the same at the radiator as it is on the transmission. Also the top line on the radiator is the return back to the transmission on most trucks.
I had to replace my hoses and instead of buying the factory lines from the dealer I bought some high quality hose and a nipple style connector/adapter that NAPA sells. My application was for a heater hose, but I'm sure they sell them for cooler lines.
what about a one piece bell housing, 4x4, exploded view 4L60E schematic? I searched all over the net for one and couldnt find it. these diagrams seem to be very hard to find eh.
Will the stock 5 speed from a 1992 4.3 bolt up to a v8.....By v8 i mean will it fit a 350 and will it fit the newer ls type engines like the 5.3
Is the bell housing different....and is the input shaft different...also what about the clutch
1991 K5 TBI 350 with SM465. One out of five times the idle will seem to fall out when taking it out of gear and coming to a stop. It feels like a misfire. It will correct itself after about 5 seconds, can usually correct it a little quicker by revving. Less commonly, it will do this going...
Anyone ever post the fix for the play in the front Tcase slip yoke? Was it just worn splines and a replacement yoke fixed it? looking for answers.
Thanks
how much up and down play is acceptable for the front drive shaft at the T-case? I have a 05 yukon xl. I am getting some front end noise in 4x4. the front diff was replaced from a truck with 60,000 miles on it, the t-case is brand new from GM, and I replaced the passenger side wheel hub. I...
So I have a 2003 chevy 1500 5.3 with a 4l60e the transmission went out so I got a parts truck and the transmission shifted great in that truck so after installing it when i took it for a test drive it has reverse and it starts out in 2nd and will not shift out of it so i unplugged the main...
A forum community dedicated to all General Motors truck owners and enthusiasts. Come join the discussion about performance, lift kits, wheels, tires, modifications, troubleshooting, maintenance, and more!