GM Truck Club Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I just put a 2" Maxx Suspension on my 08 Siverado and larger 18" tires. Max psi for the tires is 44. I'm running at 36". Does this sound about right? I also have Boss crome wheels on the truck which Iowa winters don't like. I'm going back to the factory wheels but I would like to change the center caps. Where can I find something else for my factory wheels. Thanks.
 

·
Registered
Joined
·
307 Posts
if your truck is a 1/2 ton then thats about right, if your truck is any bigger then that i suggest running them at max pressure since a 3/4 should have about 50 psi and a 1 ton should have 65 in the front and 70-80 in the rear depending on if you haul anything, it also says on the inside of the driver side door panel what the factory recommends you run

i work at a tire shop and we have to check air pressure it kills me when people have huge truck on tires that are made for a way lighter truck and they max out at 35psi and they are running the tires at 50, so glad you actually bothered to check the max on the tire
 
1 - 2 of 2 Posts
Top