GM Truck Club Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 · (Edited)
Hey, I'm putting a new stereo in my friend's 05 equinox and it's different from my Toyota. There are two wiring harnesses going into the stereo instead of the just one on my car. Rather than just mess around until I figure it out, I was wondering if you could tell me what each of them are.



Thanks!
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
d nothing when the keys off (fuse block ign2 usually works good).
I've been trying to wire it to the fuse box by either tapping into the wires behind it or pulling out the fuse and sticking the wire in it's place, but no luck. What is the "ign2" or do you know which fuse I should try?
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #6 ·
Thanks guys, I got the stereo working but two problems came up.

1. Long story short, I need a new male wiring plug for the hazard lights/ turn signals. It's the brown plug with 8 wires coming out of it. Anyone know a site I could find one?

2. The radio antenna wouldn't plug into the female plug on the Kenwood headunit, is there an adapter I need?

thanks
 
1 - 3 of 3 Posts
Top