GM Truck Club Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
35 Posts
gd i have the same problem with blowing bulbs, esp on rt rear normally turn signal bulb, i found i had a cracked lense so i cleaned it and used some good silicone caulking ( clear ) and cailked the crack, replace the socket, ( the socket was getting moisture in it esp. during automatic car washes ) make sure you put electrical grease in all sockets when installing new bulbs this will make better connections and keep any water out, please note the crack can be real slight good luck ken ( marine 59 )
 
1 - 1 of 1 Posts
Top