GM Truck Club Forum banner

gm 14 bolt axle conversion

407 Views 1 Reply 2 Participants Last post by  xPosTech
Hello first off i have a 93 k1500 4x4 i blew up the rear end which was the stock 10 bolt so i decided to swap it with the heavier duty full float gm 14 bolt. I am keeping the stock driveshaft however i dont know what u joint conversion i need if it helps the driveshaft says spicer 5. I dont know what either one is both oem and the one for the 14 bolt as the oem is to big for the 14 bolt yoke. If anyone could help it would be greatly appreciated.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.