GM Truck Club Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
I got h2s on my 03 1500hd and i had the centers from my 16s on there and they are starting to just wobble loose so i had to throw on the hummer centers,:grrrrrr: so is there a year that would fit better or am i SOL?
 

· Registered
Joined
·
1,156 Posts
Are your wheels 6 lug or 8 lug? How long does it usually take the center caps to become loose once you have them on your truck?
 

· Registered
Joined
·
79 Posts
Discussion Starter · #4 ·
8 lug, its a 1500HD. it takes like 10 minutes lately. i can hear it wobble around. its usually only the back 2 that do it.
 

· Registered
Joined
·
1,627 Posts
Yeah I think all the center caps from the years are pretty much the same. You try some NBS ones??
 

· Registered
Joined
·
79 Posts
Discussion Starter · #8 ·
Well i thought about doin that, but i already know theyd bend me over for a new set. So i was considering keeping the hummer caps, but painting the small center part that says hummer black. any ideas on painting chromed plastic?
 

· Registered
Joined
·
1,627 Posts
Just scuff it up good with a scotch pad and clean it real nice before you paint and you should be good to go!
 

· Registered
Joined
·
914 Posts
hold on, they're the ones that pop on over the lugs right? you should be able to use pliers to close up the metals tabs that squeeze the lugs or see if you you can find a slightly larger bodied lug nut with the stock size bore and thread pitch
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top