GM Truck Club Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
i have a 96 k2500 Chevy. i know there's 2 5mm studs coming up from the head lights and 2 what looks like t25 torx studs down in the lights more and i assume they aim the lights. i just want to know witch one does what. i turned the 2 5 mm atuds and it dint seam to do anything for the hi or low beams. thanks for the help.
 

·
Registered
Joined
·
45 Posts
I did this last night actually on my 89 K1500.

use a socket on the outside of it, i stripped the torx on the inside. The one directly on top in the middle adjusts up and down, the one on the right side of the lamp adjusts left/right. Right is down and left is up on the vertical adjustment.

the left to right adjustment one is kinda hard to get to, you'll probably need an extension for it.
 
1 - 2 of 2 Posts
Top