GM Truck Club Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,966 Posts
If it were my truck I'd go down to frame (Between box and cab) then along frame, up firewall and in cab from firewall area. (There is some big gromets around steering column to run in.) Then use vaseline or silicone grease to pop the grommet back in (there kinda a bitch it get in and out)...Good luck:great:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top