GM Truck Club Forum banner
1 - 11 of 11 Posts

· Premium Member
Joined
·
30,177 Posts
Discussion Starter · #1 ·
My neighbor was asking me about wheel/tire sensors for his 2004 Tahoe. He put on some 18" chrome rims and new tires and they're not working now. (Not sure what he did).

Anyone have a source on these?
 

· Premium Member
Joined
·
30,177 Posts
Discussion Starter · #4 ·
I'm not sure. I've never had to deal with these before so I'm not up on the technology or what has to be done. I'll check with him and get back with you.
 

· Premium Member
Joined
·
30,177 Posts
Discussion Starter · #6 ·
How does the system work? How does the signal from the sensor get back to the computer?
 

· Premium Member
Joined
·
30,177 Posts
Discussion Starter · #8 ·
How many pieces are involved in this? Let's just say that he's got new rims and tires with new valve stems. What does he need to get it working again?
 

· Registered
Joined
·
1 Posts
I put the gibbs 20in rims on a 2005 tahoe ls and was told by chevy that the sensor will never work when you change rims unless the specific rim is compatible with the vehicle sensor. The error message can not be removed or deleted, so every time it will issue a warning to check tire pressure. Chevy was going to make gibbs rims that will work with the TPM, but they havent come out yet. At least in May 05 they werent out yet.
 

· Premium Member
Joined
·
30,177 Posts
Discussion Starter · #10 ·
Ok, I'll let him know. He's been working a wierd schedule for the past 2 months so I haven't seen him anyhow. Thanks for the info on that though.
 

· Registered
Joined
·
2 Posts
I NEED HELP ABOUT PRESSURE SENSOR IHAVE A TAHOE LS 2007 AND I SWITH MY ORIGINAL CHEVI WHEELS 17 INCH TO LTZ 20 INCH ORIGINAL WHEELS AND THIS SENSOR IS NOT WORKIND AND THE COMPUTER SAY GO TO SERVICE TO CHECK THE TIRE SENSOR AND MY ORIGINAL WEELS AND THE NEW 20 COMING WITH THIS SENSOR PLEASE I NEED YOUR HELP THANK YOU
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top