GM Truck Club Forum banner

L.E.D. Bulbs

1678 Views 3 Replies 4 Participants Last post by  TRPLXL2
I am thinking of switch my turn signal bulbs in my bumber lights to LED's. Has anybody had any issues doing this? I know some vehicles recognize the low power draw and throw the warning light for burned bulb on the dash. Does the 04 Suburban/Tahoe have any issues with this?

Thanks Nick
1 - 4 of 4 Posts
It will probably blink faster because it uses less power. I know thats how it works with cherokees and other jeeps. :neutral:
I want to say that you can buy some type of resitive load to put inline with one of the lights to create the load that a regular lamp would pull so that the car does not warn you about burned bulbs. I'm not sure where you can get it from though.
I had a set of projector headlights in my silverado 05', and I had a total of 12 led turning bulbs. I even had the multi color changing ones from auto zone, I didn't have to do anything to mine. Ironically they were the only thing that worked in those stupid halo headlights, but everybody's different!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.