GM Truck Club Forum banner

My other daily driver/ weekend racer...

3500 Views 26 Replies 10 Participants Last post by  Vink70
This was my motivation for getting a full size truck. Gotta tow this lil ol 4 cylinder to the track just in case something breaks....

old setup:

ill have to show the new setup when i get it more done.

Last years personal best was a 12.6 @ 117 in the 1/4 with sparks shooting out from a blown clutch all the way down the track... Im back this year with a Clutch Masters twin disc so that wont be an issue at all.

Mods happening at the moment are a tubular turbo header, bigger wastegate with all vband joints, 3" exhaust w/ cutout, bigger charge pipes, more accommodating intercooler, quite a few little goodies. Fab work/exhaust.jpg

Aiming for an 11.500-11.999 in the 1/4 since thats as fast as I can legally go, and I refuse to cage it since I have to do a 6 point minimum. I daily drive it too much to do that. I dont want to climb over bars to get in. hope to have it wrapped up by the end of july since im missing all the nice weather.

Any questions or more in depth, feel free to ask.
See less See more
1 - 3 of 27 Posts
Very nice, I hope to have my Cobalt SS/TC in the mid to low 11's soon

Great work
Very nice work my friend. Did you do the tank yourself? If you did and would be interested in doing some for my Silverado ss thats would be awesome

Great work
I did not do the tank myself. Thats all my fabricator who is a genius. If you were close to him depending on your location, I could help hook you up. I woudl also love to tell you that he can make you something that will fit there perfect, but I know he is slammed working on my stuff and side work in general. For most, they are just a show piece... the stock plastic one dissipates heat better I think, but I couldnt keep it in the stock location so thats my only reason for moving it. I do however love the AN fittings. So much easier/cleaner/tighter.
awesome thanks for the info. I am really looking for covers to dress up the engine bay, if he could make something to cover the plastic that would be bamf, I could polish it myself. Thanks again

1 - 3 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.