GM Truck Club Forum banner

1 - 20 of 45 Posts

·
Registered
Joined
·
1,255 Posts
Discussion Starter #1
Hey everyone i been talking about getting the N-FAB nerf steps for awhile now and finally pulled the trigger of getting them for $342 along with my NOTTO HID KIT on it's way also!!!The price for the N-FAB's were not bad compared to allot of site's! I will have them come in sometime hopefully by next week and put on the same day or following day. Anyone with comments or questions you are welcome pic's will be up soon as i install them!! thanks, Jake.
 

·
Registered
Joined
·
1,255 Posts
Well i called www.4WheelParts.com today said my order was going out today so should be here in the next 3 days or so wed. or thursday and installed by or before friday depending on delivery i will post pic's soon as i get them on and tell me how it looks!
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #3
The N-Fab nerf steps should be here today but will be later in the afternoon and want have time to install them depending on what time they do arrive. If so i will install them tom. with one of my buddy's and will take some pic's!
 

·
Registered
Joined
·
5,008 Posts
If your using 4 wheel parts, have you tried and haggle with them. I have gotten some great prices from them for military discount and by telling them I found cheaper somewhere else. They will price match and usually go lower.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #5
Yeah man i forgot about the military discount! Well i guess it wil be okay atleast i know that now when i buy something else from there they were the cheapest i found them for online though. I am still waiting on the them to come in today but they will be here by 7 or before. I plan on getting them put on tomorrow and i will take some pic's will look much better! I still haven't freceived my hid kit from www.carid.com i received my girl friends 6,000k halogen bulb's today but they haven't even sent my hid kit yet! Hopefully will be sent tomorrow and get them monday or tuesday!
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #6
Well i received my N-Fab nerf steps yesterday and when i got them out the box today they were damaged! It looked like someone took a grinder on one about 2 inchs long right beside the steps and looks way to obvious! I will be boxing them up tomorrow and getting a form printed offline off 4wheelparts to send them back! Also were they suppose to come with the plastic piece's to cover the ends of the rails so water couldn't rust them? I never received any if there was and they bag of bolt's were busted and were laying around all in the box! This is more of a hassle than anything but hopefully i'll go ahead and get everything straightened out this time and receive them back not next week but week after and can mount them up to the truck!
 

·
Registered
Joined
·
539 Posts
Wow man that sucks, Hope things get straighten out, cant wait to see them on your ride
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #8
Yeah man i thought it would be a hassle but i just made things better buy handling it my way lol. I emailed them to let them know all my info on the nerf steps and the order info along with my billing info and also sent picture's for proof along with it. I told them how they were and everything and will be printing a RMA form off and tape the box up and get Ups to come by today too get them shipped back. I also told them i want a full refund for them since they were damaged and will make sure i state that on the form i send back too. I just went ahead and ordered me another set just like it off there site and told them i would be doing that and would like my refund for the other's by next week or so just as long as i get my money back for them. I wll be getting them hopefully tuesday or wednesday because last order i ordered them on a saturday and received them wednesday around 3 so there shipping is pretty fast compared to allot of site's. Well this coming week i will have them installed the day or one day after i receive them and post pic's along with my Hid kit that comes in next week.
 

·
Registered
Joined
·
5,008 Posts
Man that sucks! Good luck with the new ones.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #10 (Edited)
Thanks man i already ordered them late last night so they should be in Tuesday-Wednesday since last order i did on saturday and got here on a wed. so actually fast shipping but is a hassle. I will getting the box and the nerf steps boxed back up this weekend along with the RMA form to get a full refund of my money back since i already ordered another set otherwise woulda have waited allot longer so hopefully everything goes well this time. The N-Fab nerf steps i already ordered now have been shipped today so earlier than i though so i'm thinking tuesday they will come in and i can get them put on that afternoon or early wednesday! I will have the damaged one's sent back for full refund of $388 bucks so either way i will have just paid for one but didn't have to go through the hassle of sending them back and taking 2 weeks to get them so i'm happy lol until i get my refund hopefully its fast!!!
 

·
Registered
Joined
·
2,248 Posts
make sure to post up some pics when they get in and you get them on!! I have been thinking about ditching my Westin bars and getting N-Fabs.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #12
No doubt man i will make sure to do that and the N-Fab arent that badly priced for how good they look to other nerf steps and some other are more than a hundred bucks more. Here is a pic of the step that was damaged don't look like much but has bare metal showing that's very notciabl View attachment 27627 e:
 

·
Registered
Joined
·
375 Posts
On a similar note, i had ordered the N Fab prerunner bar for my Suburban. i called first and was told it would fit the 3/4 ton Burb. I then placed an order for one with the pebble grain rough finish. when it showed up, i was sent a gloss black bar. the packaging was not the best. the nuts and bolts were loose and rattling around the box and probably scratched the finish. needless to say, there was no way it would mount up. after numerous emails and calls, i was finally notified that it would not fit a Suburban 2500 ( yes the frames are different) any way they emailed me a Fedex tag so i sent it back and awaiting a refund. their products look good on a website but i think i'm going a different route with a Go Rhino series 3000 black grille gurd that will fit a 2500
 

·
Registered
Joined
·
7,291 Posts
Alston, the N-Fabs hang down more than your Westins so you may have rubbing/hitting objects when off road. There fine on trucks with 6" lifts or on a street only truck.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #15
Yeah i love them on lifted trucks too. Hey MARKO24 i agree with that they don't seem to get everything right where i bought mine offline. I already have the other Set of N-Fabs on the way and the damaged set still here that i will be sending back monday for a FULL REFUND since this would be much easier then sending them back and being 2 weeks or more! They are already suppose to be here this coming up wednesday and i received the damaged one's this wednesday so i'll get them put on wednesday or thursday and then be waitinf for my refund fot the others... how long u been waiting i want to get mine back within the week they get them i'm not gonna play games lol!?
 

·
Registered
Joined
·
375 Posts
Yeah i love them on lifted trucks too. Hey MARKO24 i agree with that they don't seem to get everything right where i bought mine offline. I already have the other Set of N-Fabs on the way and the damaged set still here that i will be sending back monday for a FULL REFUND since this would be much easier then sending them back and being 2 weeks or more! They are already suppose to be here this coming up wednesday and i received the damaged one's this wednesday so i'll get them put on wednesday or thursday and then be waitinf for my refund fot the others... how long u been waiting i want to get mine back within the week they get them i'm not gonna play games lol!?

I shipped the Box back to NFAB on wed. this morning i checked FEDEX tracking and it is sitting on a truck in houston waiting to be delivered tuesday morn. after the holiday. i will let you know how long it takes for a refund.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #17
Alright sounds good man. I guess if i send my back monday should be there Friday i suppose. I hope it doesn't take too long for a refund though but who knows! If these N-Fabs are damaged i'm gonna raise hell and have to go thru the process of sending to boxes back and getting almost $800 bucks back! I doubt this will happen again but hope all goes well will update this week when i get them and get them put on!
 

·
Registered
Joined
·
2,248 Posts
Alston, the N-Fabs hang down more than your Westins so you may have rubbing/hitting objects when off road. There fine on trucks with 6" lifts or on a street only truck.
I guess they are not what I "need" then. I really dig the looks but why I was looking into new ones is I bottomed out on my driver's side and bent that board and broke the plastic step pad too. I guess they might look goofy on a leveled 1/2 ton and if they hang lower they deffently will not do.
 

·
Registered
Joined
·
7,291 Posts
Alston, you would bottom out the N-Fabs easier than the Westins and the N-Fabs aren't that heavy of a metal so they would bend also. Maybe look into getting some rocksliders for your truck. They can also be used as a step.
 

·
Registered
Joined
·
1,255 Posts
Discussion Starter #20
Yeah i agree the N-Fab are mostly for lifted trucks like mine that are hard to get in cause i'm 5'10 and still have to kinda lightly jump to get in.I will be installing a 3 inch body lift sometime this year and see how much it helps then!
 
1 - 20 of 45 Posts
Top