GM Truck Club Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2010 Silverado LS. It has a black instrument cluster with only fuel and temperature gauges (besides speedo and tach). I was wondering what Im getting into trying to change to the LT style cluster with the silver color, oil, and voltage gauges. Is the wiring for oil press, and votage already in place. I know sometimes, they just have unused wires plugged into dummy connectors from the factory.

I want to eventually change the steering wheel to match, as well as, the front center seat and rear seat.

Thanks for any info.
 

·
Registered
Joined
·
1,218 Posts
I have a 2010 Silverado LS. It has a black instrument cluster with only fuel and temperature gauges (besides speedo and tach). I was wondering what Im getting into trying to change to the LT style cluster with the silver color, oil, and voltage gauges. Is the wiring for oil press, and votage already in place. I know sometimes, they just have unused wires plugged into dummy connectors from the factory.

I want to eventually change the steering wheel to match, as well as, the front center seat and rear seat.

Thanks for any info.
It should all be there....I was going to change mine out but could never find a used one. The dealer is pricy and Require your old one as a core....plus they won't sell you one that isn't for your truck.
 

·
Registered
Joined
·
165 Posts
Go on E-Bay they have all kinds of gauge setups. Some vendors even program the cluster so you can use it right away. If not you have to take it to the dealer and get it done. I had the same setup as you and went for a white faced 6 gauge, 140 mph cluster. You will of course have to get a new instrument bezel. E-Bay again. Remember....once you start, the mods never end!:glasses:
 
1 - 3 of 3 Posts
Top