GM Truck Club Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
23 Posts
NP263HD transfer case

Hi all, just looking to see if anyone has any information on how to take this g.d. :grrrrrr:transfer case apart. I got the case to open but I can't get it to split in half, I really don't want to break something getting it apart although it is already broken, but I want to rebuild this thing myself because I am not only cheap but poor as well, so if anyone has information or can scan me a couple of pages from the 2001 silverado 2500HD factory service manual, I would love them forever!! Thanks!
 

·
Registered
Joined
·
126 Posts
According to my diagrams, there should be areas on the left and right side of the case where you can insert screw drivers or pry bars and pry the two halves of the case apart. It does say you have to pry on both sides with equal pressure at the same time!!
Hope this helps.
 

·
Registered
Joined
·
23 Posts
Discussion Starter · #3 ·
So it does say to "pry" ok, I just thought that maybe there was a snap ring or something in there that needed to be removed before you could get it in half, and I really didn't want to pry it apart and break something.
 
1 - 3 of 3 Posts
Top