GM Truck Club Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hi! I was able to replace the oil pressure sensor, but the connector was so brittle and I ended up with a broken connector. Now I bought a connector but the wire colors are black red and yellow while the original are black, tan and white. Please help which wires should be connected. Thank you!
 

·
Registered
Joined
·
1,276 Posts
Alberto, what year and model vehicle are you working on?
 

·
Registered
Joined
·
618 Posts
If the connector body is the same and plugs into the sensor, cut and splice one wire at a time making sure they go to the same pin. Sometimes aftermarket wire connectors use different colors, you need to do one at a time and match it how it was on the old connector.
 
  • Like
Reactions: bazar01

·
Registered
Joined
·
27 Posts
Discussion Starter · #4 ·
Im working on my 2005 2500 suburban 6.0.
there was nothing left of the connector housing. I saw on ebay an oem connector. In the meantime, i have no reading on the instrument cluster. I hope it will not affect engine performance.
 

·
Registered
Joined
·
1,276 Posts
Show us your new connector.
 
1 - 5 of 5 Posts
Top