GM Truck Club Forum banner

Post your 0-60 times for your GM truck.

3755 Views 15 Replies 9 Participants Last post by  ChevyFan
Just wanted to know what people's 0-60 times are.

I ran mine the other day and got ~8.2 seconds. I did a mild brake torque to get the engine revs up and let er go. I'm sure I could do better with a few more times.
1 - 2 of 16 Posts
From the factory my truck supposedly has a 0-60 time of about 7.9-8 seconds I have never tested that because I baby the truck.
My dad had a 1996 Yukon and it was not very quick. Doing a 0-60 is not going to destroy it IMO.

The 96 Tahoe was quite quick if you drive it right. The tranny and engine work seamlessly with each other for each gear and when to shift. To achieve that time I would need to be WOT the entire acceleration and the engine would get very close to red line while drawing out each gear.
1 - 2 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.