GM Truck Club Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
241 Posts
Discussion Starter · #1 · (Edited)
Hey Guys, I have seen alot of posts dealing with trans mods, mostly servos and I would like some help determining what all I need. I was looking at the Oregon Perforancs website and of course they have lots of stuff, here are the parts I need help with Corvette Servo Kit Y/N Servo Release Check Valve Y/N 4th Gear Servo Y/N 2nd Gear Servo Y/N HP Shift Kit Y/N. I am going to get a Wheatly Tune, but I want to upgrade my trans first. I also would like your opinons on locking difs Eaton Auborn Detroit. I drive my truck on the hwy mostly, but if I want to go mudding I want to know my drivetrain can take it an I also want to blow the doors off some of these punks in "fast cars". Thanks in advance :party::glasses::gasp:

I forgot about a Trq Converter. I see alot of guys use Yank Converters 2600 or 3000?
 

·
Registered
Joined
·
718 Posts
I have a 2800 TCI street fighter stall convertor and I love it alot http://www.tciauto.com/ /Transgo HD 2-C Shift Kit / Sonnax Servo Second Gear / Sonnax Servo 4th gear "SUPER HOLD" / FLT Alluminum and Steel Accumulator Pistons . http://finishlinetrans.com/index.htm if you have any Questions on anything FLT(Finish Line Transmissions) a Call Chunk or Vince will help you out . You can also order your part from them also ..... If you are lookin into a Converter it would help to get a Transmission Cooler I have a Tru Cool Max 28k . I hope this will help you out

Mark
 
1 - 2 of 2 Posts
Top