GM Truck Club Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2009, GMC Sierra on a 4-7 drop ( 7 inch flip kit in the back, 2 inch spindle in the back and 2 inch struts with 2 inch re-locators ) right now with 24 inch rims. The tires on it are 285/35 just in case that plays into tubing it.

Now what my plans are is to go to a 6-9 drop or 6-10, by taking out the 2 inch re-locators and adding 4 inch lower and upper control arms to get 6 inches in the front. Now in the back i already have 7 inches with the flip kit as I said before, but I plan on just replacing my shackles with 2 inch or 3 inch drop shackles in the back. Now what I am asking is, I know I can get away in the back with a 6-9 drop without tubing it, but if I go to a 6-10 drop with the 3 inch shackles instead of 2 inches will I need to tub it on a 6-10 with my 24's and 285/35 tires.

Yes its notched btw, no worries there
 
1 - 1 of 1 Posts
Top