GM Truck Club Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
18,118 Posts
I have not been able to find the correct volume of fluid; however, the level should be between 1/2" below the hole, to the bottom of the hole (truck level).
In other words, if checking and the level is no lower than 1/2" below the hole, the level is good. If filling, or topping up, the fluid should be added until it drips out of the fill hole.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top