[silverado469]

So I noticed the other day that my front tires rub on the upper control arm at full lock both left and right hand turns.*

My trucks an 07 NNBS with the rancho lift and 325/60r18 tires. Now I was thinking of doing a spacer to prevent the rubbing but if I do the spacer I'm gonna rub on the back of the front wheel well. *

Just want some opinions on what I should do and if you guys think that the tire rubbing like that will be a problem in the long run.

 

[Rockstarrchevy81]

I really dk if it would affect the truck with it rubbing as long as it's while your turning slighty and other than that maybe a tire wearing inside the wheel well other than that no a big issue. I think the 325/60/r18 is a 33 13.50 which is what it was on my cooper stt's so they might be too wide and that's why it would cause this since Ranch prob. recommended a 33 12.50 without rubbing. I guess you could add a spacer though to help clear but not sure it will help get a 1-2 inch spacer at the most so front doesn't sit up allot higher though if you do. My stt's rubbed some on the upper control arms but couldn't feel it and only reason i knew is where that one spot the black was fading some but it didn't mess anything up on the truck so maybe you could just keep them on too man i say either way.