Congrats man! Did the ****ty shoes say "Made in China" on the back?
Sticking rear brake shoes-
Overheating rear brake shoes- suburban
My brakes have been making a lot of noise recently and when I pulled the left rear drum off I noticed the shoes were cracked and worn unevenly. I had a shop do the shoes several months ago which included a lifetime warranty. They inspected, replaced the shoes and hardware and said I was good to go.
Almost immediately we noticed there was still some noise and confirmed that the shoe is sticking on that side (generating quite a bit of heat). Took it back to the shop, they did another inspection and said they couldn't tell what it was for sure and that it would take up to 2 hours of digging into it to determine what the problem might be.
My question to them was what else could it be besides the wheel cylinders? The manager responded it could be one of many different issues in the hydraulic system.
Well I'm not going to give them the OK to fish around for a couple of hours to tell me what is wrong.
I'm thinking I start with replacing the wheel cylinders (though they appear to be working OK).
Any ideas on what else it could be?
My brakes have been making a lot of noise recently and when I pulled the left rear drum off I noticed the shoes were cracked and worn unevenly. I had a shop do the shoes several months ago which included a lifetime warranty. They inspected, replaced the shoes and hardware and said I was good to go.
Almost immediately we noticed there was still some noise and confirmed that the shoe is sticking on that side (generating quite a bit of heat). Took it back to the shop, they did another inspection and said they couldn't tell what it was for sure and that it would take up to 2 hours of digging into it to determine what the problem might be.
My question to them was what else could it be besides the wheel cylinders? The manager responded it could be one of many different issues in the hydraulic system.
Well I'm not going to give them the OK to fish around for a couple of hours to tell me what is wrong.
I'm thinking I start with replacing the wheel cylinders (though they appear to be working OK).
Any ideas on what else it could be?
1 - 1 of 18 Posts
1 - 1 of 18 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
GM Truck Club Forum
A forum community dedicated to all General Motors truck owners and enthusiasts. Come join the discussion about performance, lift kits, wheels, tires, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
