GM Truck Club Forum banner

Transmission shift cable fell off side of trans

78751 Views 12 Replies 6 Participants Last post by  RayVoy
Hello. Anyone know what I need to do to fix this? I was able to push the cable end back on for now but it's not on there very good. It appears the hole in the cable end is reamed out a bit and/or the pin on that lever on the side of the trans is corroded too much:

I'd like to try and replace that lever first if possible. Anyone know what it's called? I can't find it anywhere online......

See less See more
1 - 1 of 13 Posts
Mine did the same thing. I removed the lever on the transmission and used a drill bit to drill it out. The corroded part dropped right out and I used a nut andbolt to reattach the shift linkage. Drove all day on it and still does fine. Didn't cost me a dime either!
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.