GM Truck Club Forum banner
1 - 1 of 4 Posts

· Registered
25 Posts
Window switches are notorious for intermittent ops. Replace-em Be sure to check for clean-tight pin contact to the switches.
Power door locks are a different story.
If ya got some kind of noise happening when you press the switch...The switch is good
Ive replaced Hundreds of worn out door lock actuators on that year body truck. 1 for each door.
You will need to remove panls and grind 1/4 rivets off to get them out of the door. Along with linkages.
Sounds like normal 18 year old truck stuff. You probably need to replace the front door hinge pins and bushings too.....The doors hard to close...Drop when opening.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.