GM Truck Club Forum banner

Won't Start after Changing wires HELP

3193 Views 16 Replies 5 Participants Last post by  KyleZ71
I put on a set of pro form valve covers today, and since the coils get moved away, I had to get longer wires (MSD) for they are mounted on top. After getting everything mounted and plugged in, the truck will not fire. It turns over but simply will not fire. To me it seems like the wires are too taught, and that could be preventing the spark. I also thought that the coil packs are out of order but I thought the packs themselves don't have a order. What do you guys think?
1 - 2 of 17 Posts
You relocated the coils, are they properly grounded where their mounted at?
I agree, Im still stuck on the grounds, especially after the mechanics report.
Are the new valve coverrs properly grounded, the hold down fasteners didnt have insulators or excess gasket material stopping them from grounding did they?
Ive seen issues similiar to this due to inadequate grounds on the coils.
1 - 2 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.