Hi. The term "memory switch" throws me a bit but anyway, on my 2001, the switch worked but not all positions. I watched a youtube video how to take the switch out, take it apart and clean the contacts. After doing so, all motion was restored. Doesn't seem like this is your problem, but maybe it'll help.

 

This was the switch that was replaced. Not sure the exact name. But was told it controls the power mirror to

 

OH, ha ha. I get it now. My bad. Duh. Memory switch for the seat. Grrrr. My reply was referring to the power mirrors. In my opinion that switch is for the seat only. The mirror switch on my truck is "below" the switch where you select Left or Right depending on what mirror you want to move. It has four arrows on it, up, down, left, right, so you can adjust the mirrors. My switch has worked fine ever since I opened it up and cleaned the contacts using alcohol and a Qtip swab.

 

Ill have to try that with the mirrors but the seat is another mystery to me lol

 

This was the switch that was replaced. Not sure the exact name. But was told it controls the power mirror to

The Exact Name for the Item You Have Pictured Above, is Called the.....Heated Memory Seat Control(s)....

This Switch Below is the Power Mirror Switch

​

 

I was thinking replacing both of those switches and the one on the seat. The control switch i guess. Maybe they have shorts or are gone bad. If not its a ground or wire somewhere. Or the seat motor is shot. But im open to any ideas before all that

 

FWIW, don't bother trying to clean the contacts on the switches. Buy a couple new ones on ebay. The last mirror switch I bought for my power/heated mirrors cost me about $9, new, and it was plug and go.

 

Thats what i was gunna do was just buy all new switches and see if it all fixed